AT Command

Description

AT!DAWSTXPWR command is used to set the dedired Tx power level in WCDMA mode in Sierra Wireless modems in the factory test mode. 


Support

Sierra Wireless Module Tutorial

Examples

KeywordsAT!DAWSTXPWR syntax, examples, parameters, error, input, response.

Try the below script in the AT Command Tester tool

////Script: at!dawstxpwr.at
//This AT command is used to set the Tx power in WCDMA mode
//in the Sierra Wireless modems in the Factory Test Mode.


//Enter the password
AT!ENTERCND="1234"

//Put the modem in to factory modem
AT!DAFTMACT

WAIT=2

//Set the radio for WCDMA 850 band
AT!DASBAND=22

WAIT=2

//Set the channel to 4132
AT!DASCHAN=4132

WAIT=2

//Set the Tx power to 15 dBm
//The power range is -57 to 28
AT!DAWSTXPWR=15

WAIT=2

//Apply temparature compensation
AT!DAWSTXPWR=15,1

Output of the above script in the AT Command Tester tool

AT!ENTERCND="1234"

OK
Password protected commands are unlocked

AT!DAFTMACT

OK
AT!DASBAND=22

22

OK
AT!DASCHAN=4132

4132

OK
AT!DAWSTXPWR=15

0,0

OK
AT!DAWSTXPWR=15,1

0,1

OK