AT Command

Description

AT!DAWGRXAGC command is used to return the Rx AGC (Automatic Gain Control) of main path or diversity path in Sierra Wireless modules.


Support

Sierra Wireless Module Tutorial

Examples

KeywordsAT!DAWGRXAGC syntax, examples, parameters, error, input, response.

Try the below script in the AT Command Tester tool

//Script: at!dawgrxagc.at
//This AT command is used to return Rx AGC (Automatic Gain Control)
//value of main path or diversity path in the Sierra Wireless modems
//in the Factory Test Mode.


//Enter the password
AT!ENTERCND="1234"

//Put the modem in to factory modem
AT!DAFTMACT

WAIT=2

//Set the radio for WCDMA 850 band
AT!DASBAND=22

WAIT=2

//Set the channel to 4132
AT!DASCHAN=4132

WAIT=2

//Get the AGC value of main path
AT!DAWGRXAGC?0

WAIT=2

//Get the AGC value of main path
AT!DAWGRXAGC?1

Output of the above script in the AT Command Tester tool

AT!ENTERCND="1234"

OK
Password protected commands are unlocked

AT!DAFTMACT

290300

OK
AT!DASBAND=22

22

OK
AT!DASCHAN=4132

4132

OK
AT!DAWGRXAGC?0

660

OK
AT!DAWGRXAGC?1

512

OK