AT Command

Description

AT#FTPTYPE AT command is used to set the FTP transfer type to binary or ascii.

AT#FTPTYPE[=]

Support

Telit Module Tutorial

Examples

AT#FTPTYPE=0
OK

KeywordsAT#FTPTYPE syntax, examples, parameters, error, input, response.

AT+FTPPORT command is used to set the data transfer type to binary or ascii.

With Online AT Command Tester tool, you can test Simcom FTP feature.

With Online AT Command Tester tool,send batch of AT commands in the script mode to test Simcom FTP feature,

Checking registration status...

AT+CREG?

+CREG: 0,5

OK
Device is registered and is roaming.

Querying bearer 1 .

AT+SAPBR=2,1

+SAPBR: 1,1,"10.101.13.111"

OK
Bearer 1 is Connected.IP address is "10.101.13.111"

Bearer 1 is Connected.

Setting up FTP parameters..

AT+FTPCID=1

OK
AT+FTPSERV="ftp.m2msupport.net"

OK
AT+FTPUN="xxxxx"

OK
AT+FTPPW="xxxxxxx"

OK
AT+FTPGETNAME="ftptest.txt"

OK
AT+FTPGETPATH="/www/m2msupport/"

OK
AT+FTPGET=1

OK

+FTPGET:1,1
FTP session sucessfully started

AT+FTPGET=2,1024

+FTPGET:2,0

OK
FTP data transfer is complete

+FTPGET:1,1
FTP session sucessfully started

AT+FTPGET=2,1024

+FTPGET:2,43
Sucessful FTP file get from m2msupport.net.
OK
AT+FTPGET=2,1024

+FTPGET:2,0

OK
FTP data transfer is complete

+FTPGET:1,0
FTP session end