AT Command

Description

AT+FTPPORT command sets up the FTP port. The value of the port can be from 1 to 65535. The default port value is 21.


Support

Simcom Module Tutorial

Examples

Get the current setting of FTP port
AT+ftpport?

+FTPPORT: 21

OK

Set the FTP port to 23
AT+ftpport=23

OK

KeywordsAT+FTPPORT syntax, examples, parameters, error, input, response.

AT+FTPPORT command is used to set up the FTP port.

With Online AT Command Tester tool, you can test Simcom HTTP feature.

With Online AT Command Tester tool,send batch of AT commands in the script mode to test Simcom FTP feature,

Checking registration status...

AT+CREG?

+CREG: 0,5

OK
Device is registered and is roaming.

Querying bearer 1 .

AT+SAPBR=2,1

+SAPBR: 1,1,"10.101.13.111"

OK
Bearer 1 is Connected.IP address is "10.101.13.111"

Bearer 1 is Connected.

Setting up FTP parameters..

AT+FTPCID=1

OK
AT+FTPSERV="ftp.m2msupport.net"

OK
AT+FTPUN="xxxxx"

OK
AT+FTPPW="xxxxxxx"

OK
AT+FTPGETNAME="ftptest.txt"

OK
AT+FTPGETPATH="/www/m2msupport/"

OK
AT+FTPGET=1

OK

+FTPGET:1,1
FTP session sucessfully started

AT+FTPGET=2,1024

+FTPGET:2,0

OK
FTP data transfer is complete

+FTPGET:1,1
FTP session sucessfully started

AT+FTPGET=2,1024

+FTPGET:2,43
Sucessful FTP file get from m2msupport.net.
OK
AT+FTPGET=2,1024

+FTPGET:2,0

OK
FTP data transfer is complete

+FTPGET:1,0
FTP session end