AT Command

Description

AT+CIPSPRT i sused to set whether echo prompt ">" after issuing "AT+CIPSEND" command.


Support

Simcom Module Tutorial

Examples

'1' prompts echo '>' and shows "send ok"
AT+CIPSPRT=1

OK

KeywordsAT+CIPSPRT syntax, examples, parameters, error, input, response.

With Online AT Command Tester tool, you can test Simcom TCP/IP feature.

You can also send commands to set up TCP/IP connection in the ‘Script Mode’ tab of the AT Command Tester,


//Check the registration status
AT+CREG?

//Check attach status
AT+CGACT?

//Attach to the network
AT+CGATT=1

//Wait for Attach
WAIT=7

//Start task ans set the APN. Check your carrier APN
AT+CSTT="bluevia.movistar.es"

//Bring up the wireless connection
AT+CIICR

//Wait for bringup
WAIT=6

//Get the local IP address
AT+CIFSR

//Start a TCP connection to remote address. Port 80 is TCP.
AT+CIPSTART="TCP","74.124.194.252","80"

//Set prompt of '>' when module sends data
AT+CIPSPRT=1

//Send the TCP data
AT+CIPSEND
>
GET https://www.m2msupport.net/m2msupport/http_get_test.php HTTP/1.0