AT Command

Description

AT+CGCONTRDP AT command returns active PDP parameters such as APN, IP address, subnet mask, gateway addres, primary and secondary DNS address etc.

Usage
Command Possible response(s)
+CGCONTRDP[=<cid>] [+CGCONTRDP: <cid>,<bearer_id>,<apn>[,<source_addr and subnet_mask>[,<gw_addr>[,<DNS_prim_addr>[,<DNS_sec_addr>[,<P-CSCF_prim_addr>[,<P-CSCF_sec_addr>[,<IM_CN_Signalling_Flag>[,<LIPA_indication>]]]]]]]]] [<CR><LF>+CGCONTRDP: <cid>,<bearer_id>,<apn>[,<source_addr and subnet_mask> [,<gw_addr>[,<DNS_prim_addr>[,<DNS_sec_addr>[,<P-CSCF_prim_addr>[,<P-CSCF_sec_addr>[,<IM_CN_Signalling_Flag>[,<LIPA_indication>]]]]]]]] [...]]
+CGCONTRDP=? +CGCONTRDP: (list of <cid>s associated with active contexts)
NOTE:       The syntax of the AT Set Command is corrected to be according to ITU?T Recommendation V.250 [14]. Older versions of the specification specify incorrect syntax +CGCONTRDP=[<cid>]

Examples

KeywordsAT+CGCONTRDP syntax, examples, parameters, error, input, response.


Test AT+CGCONTRDP command with AT Command Tester