AT Command

Description

AT+FTPCID sets up teh bearer profile to be used for FTP connection. Bearer profiles are set up bt AT+SAPBR AT command which sets up bearers for GPRS or circuit switch connection.

AT+FTPCID=?
AT+FTPCID=
AT+FTPCID?


Support
Simcom Module Tutorial

Examples

Get the current bearer profile for FTP connection,
AT+ftpcid?

+FTPCID: 1

OK

Use bearer '2' for FTP connection,
AT+ftpcid=2

OK

KeywordsAT+FTPCID syntax, examples, parameters, error, input, response.

With AT Command Tester tool, you can test Simcom FTP feature.

With AT Command Tester tool,send batch of AT commands in the script mode to test Simcom FTP feature,

Checking registration status...

AT+CREG?

+CREG: 0,5

OK
Device is registered and is roaming.

Querying bearer 1 .

AT+SAPBR=2,1

+SAPBR: 1,1,"10.101.13.111"

OK
Bearer 1 is Connected.IP address is "10.101.13.111"

Bearer 1 is Connected.

Setting up FTP parameters..

AT+FTPCID=1

OK
AT+FTPSERV="ftp.m2msupport.net"

OK
AT+FTPUN="xxxxx"

OK
AT+FTPPW="xxxxxxx"

OK
AT+FTPGETNAME="ftptest.txt"

OK
AT+FTPGETPATH="/www/m2msupport/"

OK
AT+FTPGET=1

OK

+FTPGET:1,1
FTP session sucessfully started

AT+FTPGET=2,1024

+FTPGET:2,0

OK
FTP data transfer is complete

+FTPGET:1,1
FTP session sucessfully started

AT+FTPGET=2,1024

+FTPGET:2,43
Sucessful FTP file get from m2msupport.net.
OK
AT+FTPGET=2,1024

+FTPGET:2,0

OK
FTP data transfer is complete

+FTPGET:1,0
FTP session end