AT Command

Description

AT+FTPPUTOPT command sets up the how the FTP PUT is to be treated by the remote server. The options are "APPE" (for append file), "STOU" (for store unique file) or "STOR" (for store file).


Support
Simcom Module Tutorial

Examples

Get the current setting for FTP PUT,
AT+ftpputopt?

+FTPPUTOPT: "STOR"

OK

Set up for append mode,
AT+ftpputopt="APPE"

OK

Set up for store unique mode,
AT+ftpputopt="STOU"

OK

KeywordsAT+FTPPUTOPT syntax, examples, parameters, error, input, response.

AT+FTPPUTOPT command is used to configure whether the file should be appended ot newly created on teh remote server.

With Online AT Command Tester tool, you can test Simcom FTP feature.

With Online AT Command Tester tool,send batch of AT commands in the script mode to test Simcom FTP feature,

Checking registration status...

AT+CREG?

+CREG: 0,5

OK
Device is registered and is roaming.

Querying bearer 1 .

AT+SAPBR=2,1

+SAPBR: 1,1,"10.101.13.111"

OK
Bearer 1 is Connected.IP address is "10.101.13.111"

Bearer 1 is Connected.

Setting up FTP parameters..

AT+FTPCID=1

OK
AT+FTPSERV="ftp.m2msupport.net"

OK
AT+FTPUN="xxxxx"

OK
AT+FTPPW="xxxxxxx"

OK
AT+FTPGETNAME="ftptest.txt"

OK
AT+FTPGETPATH="/www/m2msupport/"

OK
AT+FTPGET=1

OK

+FTPGET:1,1
FTP session sucessfully started

AT+FTPGET=2,1024

+FTPGET:2,0

OK
FTP data transfer is complete

+FTPGET:1,1
FTP session sucessfully started

AT+FTPGET=2,1024

+FTPGET:2,43
Sucessful FTP file get from m2msupport.net.
OK
AT+FTPGET=2,1024

+FTPGET:2,0

OK
FTP data transfer is complete

+FTPGET:1,0
FTP session end