AT Command to read and store user profiles
Certain configuration paramaters can be set using AT command and those can be saved as user profiles.
To read current user profile,
at&v
ACTIVE PROFILE:
E1 Q0 V1 X4 &C1 &D1 +IFC= 0,0 +FCLASS0
S00:0 S03:13 S04:10 S05:8 S07:60 S08:2 S10:15
STORED PROFILE 0:
E1 Q0 V1 X4 &C1 &D1 +IFC= 0,0 +FCLASS0
S00:0 S03:13 S04:10 S05:8 S07:60 S08:2 S10:15
STORED PROFILE 1:
E1 Q0 V1 X4 &C1 &D1 +IFC= 0,0 +FCLASS0
S00:0 S03:13 S04:10 S05:8 S07:60 S08:2 S10:15
OK
Above actove profile indicates that that echo mode is on(E1), device transmits result code (Q0), response format is long result code format (V1), DCD line is ON only in the presence of data carrier (&c1), ON->OFF on DTR (&D1), no flow control (+IFC=0,0), data fax mode (+FCLASS0) etc.
To configure value in certain profile,
AT&W0
OK